- SAE J403 Valve
- SAE J403 Flange
- SAE J403 pipe fitting
- SAE J403 angle bar
- SAE J403 pipe
SAE J403
Production specification
Data center describes many of the common steel models, we can not determine the company's warehouse has all types of steel products inventory or raw materials.
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.
Categories: Metal; Ferrous Metal; Carbon Steel; AISI 1000 Series Steel; Low Carbon steel Material Notes: AISI 1005 Low Carbon steel Key Words: UNS G10050, ASTM A29, ASTM A510, MIL SPEC MIL-S-11310 (CS1005), SAE J403, SAE J412
Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 7.872 g/cc | 0.2844 lb/in³ | Composition 0.06% C, 0.38% Mn, 0.01% Si, annealed at 925°C |
Mechanical Properties | Metric | English | Comments |
Modulus of Elasticity | 200 GPa | 29000 ksi | Typical for steel |
Bulk Modulus | 140 GPa | 20300 ksi | Typical for steel |
Poissons Ratio | 0.290 | 0.290 | Typical For steel |
Shear Modulus | 80.0 GPa | 11600 ksi | Typical for steel |
Electrical Properties | Metric | English | Comments |
Electrical Resistivity | 0.0000174 ohm-cm | 0.0000174 ohm-cm | Typical steel |
Thermal Properties | Metric | English | Comments |
CTE, linear |
12.6 µm/m-°C @Temperature 0.000 - 100 °C |
7.00 µin/in-°F @Temperature 32.0 - 212 °F |
|
13.1 µm/m-°C @Temperature 0.000 - 200 °C |
7.28 µin/in-°F @Temperature 32.0 - 392 °F |
||
13.5 µm/m-°C @Temperature 0.000 - 300 °C |
7.50 µin/in-°F @Temperature 32.0 - 572 °F |
||
13.7 µm/m-°C @Temperature 0.000 - 400 °C |
7.61 µin/in-°F @Temperature 32.0 - 752 °F |
||
13.7 µm/m-°C @Temperature 0.000 - 1000 °C |
7.61 µin/in-°F @Temperature 32.0 - 1830 °F |
||
14.2 µm/m-°C @Temperature 0.000 - 500 °C |
7.89 µin/in-°F @Temperature 32.0 - 932 °F |
||
14.6 µm/m-°C @Temperature 0.000 - 600 °C |
8.11 µin/in-°F @Temperature 32.0 - 1110 °F |
||
14.9 µm/m-°C @Temperature 0.000 - 700 °C |
8.28 µin/in-°F @Temperature 32.0 - 1290 °F |
||
16.6 µm/m-°C @Temperature 0.000 - 800 °C |
9.22 µin/in-°F @Temperature 32.0 - 1470 °F |
||
Specific Heat Capacity | 0.481 J/g-°C | 0.115 BTU/lb-°F | 50-100°C (122-212°F) |
0.519 J/g-°C @Temperature 150 - 200 °C |
0.124 BTU/lb-°F @Temperature 302 - 392 °F |
||
0.536 J/g-°C @Temperature 200 - 250 °C |
0.128 BTU/lb-°F @Temperature 392 - 482 °F |
||
0.553 J/g-°C @Temperature 250 - 300 °C |
0.132 BTU/lb-°F @Temperature 482 - 572 °F |
||
0.595 J/g-°C @Temperature 350 - 400 °C |
0.142 BTU/lb-°F @Temperature 662 - 752 °F |
||
0.662 J/g-°C @Temperature 450 - 500 °C |
0.158 BTU/lb-°F @Temperature 842 - 932 °F |
||
0.754 J/g-°C @Temperature 550 - 600 °C |
0.180 BTU/lb-°F @Temperature 1020 - 1110 °F |
||
0.846 J/g-°C @Temperature 850 - 900 °C |
0.202 BTU/lb-°F @Temperature 1560 - 1650 °F |
||
0.867 J/g-°C @Temperature 650 - 700 °C |
0.207 BTU/lb-°F @Temperature 1200 - 1290 °F |
||
1.105 J/g-°C @Temperature 700 - 750 °C |
0.2641 BTU/lb-°F @Temperature 1290 - 1380 °F |
||
Component Elements Properties | Metric | English | Comments |
Carbon, C | <= 0.060 % | <= 0.060 % | |
Iron, Fe | 99.5 - 100 % | 99.5 - 100 % | As remainder |
Manganese, Mn | <= 0.35 % | <= 0.35 % | |
Phosphorous, P | <= 0.040 % | <= 0.040 % | |
Sulfur, S | <= 0.050 % | <= 0.050 % |
Properties
|
Conditions
|
||
T (°C)
|
Treatment
|
||
Density (×1000 kg/m3)
|
7.85
|
25
|
|
Poisson's Ratio
|
0.27-0.30
|
25
|
|
Elastic Modulus (GPa)
|
190-210
|
25
|
|
Properties
|
Conditions
|
||
T (°C)
|
Treatment
|
||
Thermal Expansion (10-6/ºC)
|
14.4
|
20-425
|
|
Products Introduction: Specifications
Valve:
Diameter : 1mm-2000mm
Steel pipe:
Size:
OD: 9.5mm - 813mm
WT: 0.8mm - 34mm
Length: 1 - 13m, also can be customed.
Items |
seamless pipe & tube, pipe & tube |
|||
Standard |
ASTM, GB, DIN, AISI, etc |
|||
Outer Diameter |
Round pipe9.5mm--813mm |
|||
square |
12.7x12.7--200X200mm |
|||
rectangular |
20X40--150X200mm |
|||
Thickness |
0.8mm - 34mm |
|||
Length |
5.8m,6m, or as customers' request |
|||
Tolerance |
a) Outer Diameter: +/- 0.2mm |
|||
b) Thickness: +/- 0.02mm |
||||
c) Length: +/- 5mm |
||||
Surface |
180Grit, 320Grit, 400Grit Satin / Hairline |
|||
400Grit, 500Grit, 600Grit Mirror finish |
||||
Application |
Widely used in petroleum, Foodstuff, chemical industry, construction, electric power, nuclear energy, biotechnology, machinery, papermaking, shipbuilding, boiler fields, etc |
Pipe fitting:
Size: 1/8 inch - 80 inch (DN6 - DN2000) WT: Sch5s - Sch160XXS
Items |
Elbow,Equal Tee,Reducer Tee,Concentric Reducer,Eccentric Reducer,Cap,etc |
|
Standard |
ASME |
ANSI B16.9,ANSI B16.28,MSS-SP-75 |
DIN |
DIN2605,DIN2615, DIN2616, DIN2617, DIN28011 |
|
SGP |
JISB2313 |
|
EN |
EN10253-1 EN10253-2 |
|
Material |
ASME |
A234 WPB,A234 WP1,A234 WP5,A234,WP9, A234 WPB11,A234 WPB12,A234 WPB22,WP91, A420,WPHY42,WPHY52,WPHY60,WPHY65, WPHY70,WP304,WP304L,WP304H,WP316, WP316L,WP321,WP347,WP347H |
DIN |
ST37.0,ST35.8,ST45.8,S235JR,P235GH,P265GH, 10CrMo910,15CrMo,12Cr1MoV |
|
JIS |
JIS G3454,STPG370,TPG410 |
|
Surface |
Black paint/bright paint/Galvanized |
|
Marking |
As customer’s requirements |
Flange:
Product Name | Flange | |
Items | Plate, Welding Neck, Slip on, Blind, Lap joint, Threaded Flange | |
Standard | ANSI | ANSI B16.5 ASME B16.47 series A/B |
DIN | DIN | |
GOST | GOST 12820-80 | |
EN | EN1092-1:2002 | |
JIS | JIS B2220-2004, KS D3576, KS B6216 KS B1511-2007 JIS B2261; JIS B8210 | |
BS | BS4504 BS10 Table D/E | |
Material | ANSI | CS A105/SA 105NSS 304/304L, 316/316L Alloy Steel: WHPY45/52/65/80 |
DIN | CS RST37.2;S235JR SS 304/304L,316/316L | |
GOST | CS CT20;16MN;SS 304/304L,316/316L | |
EN | CS RST37.2;S235JR;C22.8SS 304/304L,316/316L | |
JIS | SS400,SF440 SS 304/304L, 316/316L | |
BS | CSRST37.2;S235JR;C22.8;Q235SS 304/304L,316/316L | |
Pressure | ANSI | Class 150, 300, 600, 900, 1500 2500lbs |
DIN | PN6,PN10,PN16,PN25,PN40,PN64,PN100 | |
GOST | PN6,PN10,PN16,PN25 | |
EN | PN6,PN10,PN16,PN25,PN40,PN64,PN100 | |
JIS | 1K,2K,5K,10K,16K,20K,30K,40K | |
BS | PN6,PN10,PN16,PN25,PN40,PN64,PN100 | |
Size | ANSI | 1/2” – 60” |
DIN | DN15-DN2000 | |
GOST | DN15-DN1600 | |
EN | DN15-DN2000 | |
JIS | 15A-1500A | |
BS | DN15-DN2000 | |
Coating | varnish, yellow paint, anti-rust oil, galvanizing etc | |
Usage | Used for the connection of all kinds of pipeline. | |
to convey the water, steam, air, gas and oil |
Standard: GB, ISO, DIN/GL, NF/BV, BS, JIS/JASO/NDS, ASTM/ SAE/ UNS/ AISI...
Related hot word search:SAE J403 Valve SAE J403,forging SAE J403,SAE J403 tube sheet,elbow SAE J403,SAE J403 flat bar,pipe SAE J403,SAE J403 Tee
Prev:1.0037
Next:UNS G10100