- Angle bar standard
- tube standard
- pipe standard
- sheet standard
- Valve standard
- flange standard
- pipe fitting standard
Alnico® 1
Production specification
Data center describes many of the common steel models, we can not determine the company's warehouse has all types of steel products inventory or raw materials.
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.
Alnico® 1 (Isotropic, Cast) Hard Magnetic Alloy
Categories: Metal; Electronic/Magnetic Alloy; Ferrous Metal
Material Notes: 59Fe-12Al-21Ni-5Co-3Cu
Physical Properties Metric English Comments Density 6.90 g/cc 0.249 lb/in³ Mechanical Properties Metric English Comments Hardness, Rockwell C 45.0 45.0 Tensile Strength, Ultimate 28.0 MPa 4060 psi Modulus of Rupture 0.0970 GPa 14.1 ksi Transverse Electrical Properties Metric English Comments Electrical Resistivity 0.0000750 ohm-cm 0.0000750 ohm-cm Magnetic Coercive Force, Hc 465 Oe 465 Oe Magnetic Remanence, Br 7200 Gauss 7200 Gauss Magnetic Maximum Energy Product, BH 1.39 MGOe 1.39 MGOe Curie Temperature 780 °C 1440 °F Thermal Properties Metric English Comments CTE, linear 12.6 µm/m-°C 7.00 µin/in-°F Maximum Service Temperature, Air 450 °C 842 °F Component Elements Properties Metric English Comments Aluminum, Al 12.0 % 12.0 % Cobalt, Co 5.00 % 5.00 % Copper, Cu 3.00 % 3.00 % Iron, Fe 59.0 % 59.0 % Nickel, Ni 21.0 % 21.0 % Descriptive Properties Demagnetization Induction, Bd (Tesla) 0.45 Intrinsic Magnetic Coercive Force, HCi (Oe) 478
Related hot word search:Alnico® 1 Alnico® 1 Valve,Alnico® 1 forging,Alnico® 1 sheet,Alnico® 1 coil,Alnico® 1 flat bar,Alnico® 1 pipe,Alnico® 1 Tee
Prev:Hard Magnetic Alloy
Next:Alnico® 4