- Angle bar standard
- tube standard
- pipe standard
- sheet standard
- Valve standard
- flange standard
- pipe fitting standard
Alnico® 4
Production specification
Data center describes many of the common steel models, we can not determine the company's warehouse has all types of steel products inventory or raw materials.
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.
Alnico® 4 (Isotropic, Cast) Hard Magnetic Alloy
Categories: Metal; Electronic/Magnetic Alloy; Ferrous Metal
Material Notes: 56Fe-12Al-27Ni-5Co
Physical Properties Metric English Comments Density 7.00 g/cc 0.253 lb/in³ Mechanical Properties Metric English Comments Hardness, Rockwell C 45.0 45.0 Tensile Strength, Ultimate 63.0 MPa 9140 psi Modulus of Rupture 0.167 GPa 24.2 ksi Transverse Electrical Properties Metric English Comments Electrical Resistivity 0.0000750 ohm-cm 0.0000750 ohm-cm Magnetic Coercive Force, Hc 729 Oe 729 Oe Magnetic Remanence, Br 5350 Gauss 5350 Gauss Magnetic Maximum Energy Product, BH 1.26 MGOe 1.26 MGOe Curie Temperature 800 °C 1470 °F Thermal Properties Metric English Comments CTE, linear 13.1 µm/m-°C 7.28 µin/in-°F Maximum Service Temperature, Air 590 °C 1090 °F Component Elements Properties Metric English Comments Aluminum, Al 12.0 % 12.0 % Cobalt, Co 5.00 % 5.00 % Iron, Fe 56.0 % 56.0 % Nickel, Ni 27.0 % 27.0 % Descriptive Properties Demagnetization Induction, Bd (Tesla) 0.3 Intrinsic Magnetic Coercive Force, HCi (Oe) 779
Related hot word search:Alnico® 4 Alnico® 4 Valve,Alnico® 4 forging,Alnico® 4 sheet,Alnico® 4 coil,Alnico® 4 flat bar,Alnico® 4 pipe,Alnico® 4 Tee
Prev:Alnico® 1
Next:Beta Titanium Alloy