How to detect the corrosion inside the elbow

DataTime:[2016-3-6]

Whether stamping elbow, or elbow push system, when its corrosion? How do you detect it corroded?
Elbow after corrosion, usually show the elbow pipe wall thinning, a partial pits and pitting.
Now bend corrosion detection method is widely used at home and abroad is the method of magnetic flux leakage and ultrasonic test.
(1) the method of ultrasonic ultrasonic testing technique is to use ultrasonic pulse reflection principle to measure the thickness of pipe wall corrosion after. Detection will launch ultrasonic pulse probe perpendicular to the elbow wall, probe first received by the inner surface of tube wall reflection pulse, then ultrasonic probe will receive from the reflection of the surface outside wall pulse, the pulse and the distance between the internal surface reflection pulse spacing reflects the thickness of tube wall.

(2) the method of magnetic flux leakage magnetic flux leakage method is based on the basic principle of the high permeability of the properties of ferromagnetic materials, elbow corrosion defect of permeability is far less than the permeability of elbow, elbow in the applied magnetic field under the action of magnetized, when no defect of the bend, for the most part lines by steel tube, the lines of magnetic force uniform distribution; When bend internal flaws, the lines of magnetic force bent, leaking pipe surface and a part of the field lines. Escape detection by magnetization bend surface of magnetic flux leakage, can determine whether defects exist.

Source: Yaang Pipe Industry Co., Limited (www.yaang.com)

∧TOP

Next: Processing Method Of Reducing Tee
Prev: List of Chemical Elements

Tel No：+86-18267732328 / Email:[email protected]
Address：Longwan District, Wenzhou, Zhejiang Province, China.

Copyright Notice © www.yaang.com Yaang Pipe Industry Co., Limited All rights reserved.
Yaang Pipe Industry Co., Ltd. is an international supplier of piping solutions for flange, butt welding fittings, socket welding fittings and threaded fittings. Our products are widely used in different industrial fields, including oil and gas, chemical industry, petrochemical industry, power plant, pulp and paper industry, environmental and water conservancy engineering, engineering projects, etc.