Packaging & Delivery
Packaging Details: | Seaworthy plywood case or as customer requests |
---|---|
Delivery Detail: | 2 - 15 days after receiving the deposit |
PRODUCTS
Credibility ,ASME B16.5 ASTM B564 Inconel 718 Blind Flange 4 Inch Class150
ASME B16.5 ASTM B564 ALLOY 400 Slip On Flange RF 5 Inch CL300
ANSI B16.9 ASTM B363 GR.WPT2 SMLS 90 Deg LR Elbow 2 Inch Sch40S
ASME B16.9 ASTM B366 Inconel 751 Concentric Reducer 12 Inch x 8 Inch SCH10S
ASME B16.9 ASTM B366 Hastelloy Alloy C22 90 Degree 3D Bend DN100 SCH160S
MSS SP-43 type A ASTM B366 Alloy 601 Butt Welded Stub End 4 Inch SCH40S
ASME B16.9 ASTM B366 Alloy 600 90 Degree LR Elbow 2-1/2 Inch SCH10S
ASME B16.9 ASTM B366 Alloy 400 90 Degree LR Elbow 1-1/2 Inch SCH10S
ASME B16.9 ASTM B366 Incoloy 825 SMLS 45 Degree LR Elbow 2-1/2 Inch SCH40S
ASME B16.9 ASTM B366 UNS N10276 Hastelloy C276 Equal Tee 1-1/4 Inch SCH10S
ASME B16.9 ASTM B366 Alloy 20 60 Degree Long Radius Elbow 2 1/2 Inch SCH40S
ANSI B16.5 ASTM B564 Nickel Alloy 200/201 WN RF Flange 8 Inch SCH80S CL600
ASME B16.5 ASTM B366 Hastelloy B3 Ring Type Joint Bleed Ring 3 Inch CL2500
Packaging Details: | Seaworthy plywood case or as customer requests |
---|---|
Delivery Detail: | 2 - 15 days after receiving the deposit |
3. Standard: ASME B16.5
4. Type: F316L WNRF Flange
5. Pressure: 300#
China Flange Manufacturer Yaang supplies ASME B16.5 A182 F316L WNRF Flange, 6 Inch, S/40S, CL300.
Composition ranges for 316L stainless steel
Grade |
|
C |
Mn |
Si |
P |
S |
Cr |
Mo |
Ni |
N |
316L |
Min |
- |
- |
- |
- |
- |
16.0 |
2.00 |
10.0 |
- |
Max |
0.03 |
2.0 |
0.75 |
0.045 |
0.03 |
18.0 |
3.00 |
14.0 |
0.10 |
F316L WNRF Flange 6 Inch S/40S CL300 | ||
1 | Material: | Stainless Steel: such as 304, 304L, 316, 316L, 321 , 310S, 904L, S31803, F51 and so on. |
2 | Standard: | GB, JIS, BS, DIN, ANSI and Non standard |
3 | ANSI Class: | 15, 030, 040, 060, 090 |
4 | Size: | 1/2" - 24" |
5 | Type: | Slip-on flanges, Blind flanges, Lap joint flanges, Welding neck flanges,Plate flange, Socket welding flanges and Treaded flanges |
6 | Pressure ratings: | Class: 150 300 400 600 900 1500 and 2500 PN: 6 10 16 25 40 64 and 160 , 5K - 40K and so on |
7 | Sealing surface: | FF ,RF, LJ, FM , R.T.J , R.J and so on . |
8 | Production process: | raw material-cutting-heating-forging-heat treatment-maching-inspection. |
15 | Application: | petroleum, chemical, power, gas, water, linepipe, heat exchanger, shipbuilding, construction, etc. |
16 | Tolerance: | not less than +_8% of normal wall thickness. |
ANSI, ASME, ASA B16.5 300lb/sq.in. WELDING NECK FLANGE RF | |||||||||||
ø | D | b | g | m | a | J* | h | k | Holes | l | Kg. |
1/2" | 95,2 | 14,3 | 34,9 | 38,1 | 21,3 | 15,7 | 52,4 | 66,7 | 4 | 15,9 | 0,900 |
3/4" | 117,5 | 15,9 | 42,9 | 47,6 | 26,7 | 20,8 | 57,1 | 82,5 | 4 | 19,0 | 1,500 |
1" | 123,8 | 17,5 | 50,8 | 54,0 | 33,5 | 26,7 | 61,9 | 88,9 | 4 | 19,0 | 1,900 |
1 1/4" | 133,3 | 19,0 | 63,5 | 63,5 | 42,2 | 35,1 | 65,1 | 98,4 | 4 | 19,0 | 2,600 |
1 1/2" | 155,6 | 20,6 | 73,0 | 69,8 | 48,3 | 40,9 | 68,3 | 114,3 | 4 | 22,2 | 3,300 |
2" | 165,1 | 22,2 | 92,1 | 84,1 | 60,3 | 52,6 | 69,8 | 127,0 | 8 | 19,0 | 3,600 |
2 1/2" | 190,5 | 25,4 | 104,8 | 100,0 | 73,1 | 62,7 | 76,2 | 149,2 | 8 | 22,2 | 5,400 |
3" | 209,5 | 28,6 | 127,0 | 117,5 | 88,9 | 78,0 | 79,4 | 168,3 | 8 | 22,2 | 7,400 |
3 1/2" | 228,6 | 30,2 | 139,7 | 133,3 | 101,6 | 90,2 | 81,0 | 184,1 | 8 | 22,2 | 8,900 |
4" | 254,0 | 31,7 | 157,2 | 146,0 | 114,3 | 102,4 | 85,7 | 200,0 | 8 | 22,2 | 11,900 |
5" | 279,4 | 34,9 | 185,7 | 177,8 | 141,2 | 128,3 | 98,4 | 234,9 | 8 | 22,2 | 16,000 |
6" | 317,5 | 36,5 | 215,9 | 206,4 | 168,4 | 154,2 | 98,4 | 269,9 | 12 | 22,2 | 20,200 |
8" | 381,0 | 41,3 | 269,9 | 260,3 | 219,1 | 202,7 | 111,1 | 330,2 | 12 | 25,4 | 31,000 |
10" | 444,5 | 47,6 | 323,4 | 320,7 | 273,0 | 254,5 | 117,5 | 387,3 | 16 | 28,6 | 44,300 |
12" | 520,7 | 50,8 | 381,0 | 374,6 | 323,8 | 304,8 | 130,2 | 450,8 | 16 | 31,7 | 64,000 |
14" | 584,2 | 54,0 | 412,7 | 425,4 | 355,6 | 336,5 | 142,9 | 514,3 | 20 | 31,7 | 88,000 |
16" | 647,7 | 57,1 | 469,9 | 482,6 | 406,4 | 387,3 | 146,0 | 571,5 | 20 | 34,9 | 113,000 |
18" | 711,2 | 60,3 | 533,4 | 533,4 | 457,2 | 438,1 | 158,7 | 628,6 | 24 | 34,9 | 134,000 |
20" | 774,7 | 63,5 | 584,2 | 587,4 | 508,0 | 488,9 | 161,9 | 685,8 | 24 | 34,9 | 171,000 |
22" | 838,2 | 66,7 | 641,2 | 641,2 | 558,8 | 539,7 | 165,1 | 742,9 | 24 | 41,3 | 195,000 |
24" | 914,4 | 69,8 | 692,1 | 701,7 | 609,6 | 590,5 | 168,3 | 812,8 | 24 | 41,3 | 238,000 |
* | The data "J" corresponds to the STD schedule |
NOTE:
1. Class 300 flanges except Lap Joint will be furnished with 0.06 (1.6mm) raised face, which is included in ‘Thickness’ (C) and ‘Length through Hub’ (Y1), (Y3). 2. For Slip-on, Threaded, Socket Welding and Lap Joint Flanges, the hubs can be shaped either vertical from base to top or tapered within the limits of 7 degrees. 3. Blind Flanges may be made with the same hub as that used for Slip-on Flanges or without hub. 4. The gasket surface and backside (bearing surface for bolting) are made parallel within 1 degree. To accomplish parallelism, spot facing is carried out according to MSS SP-9, without reducing thickness (C). 5. Depth of Socket (D) is covered by ANSI B 16.5 only in sizes through 3 inch, over 3 inch is at the manufacturer’s option. 6. Welding Neck Flange Bore Size SCH10, SCH20, SCH30, STD, SCH40, SCH60, SCH80, SCH100, SCH 120, SCH140, SCH160, XS |
Weld neck flange is a type of pipe flange that incorporates a cast-in neck that is welded to the pipe. Unlike a plain flange that is slipped over the pipe prior to being welded into place, a weld neck flange has a spout-like neck that is beveled to match up to the pipe. Once the pipe is beveled to match the weld neck flange, a perfect V shape is created in which a butt weld is placed to connect the two components.
APPLICATIONS :
1. petrochemical industry
2. Pharmaceutical industry
3. Food industry
4. Aviation and aerospace industry
5. Architectural decoration industry
6. Oil and gas industry
Other Features:
1) Chemical and Physical characteristic: durable, corrosion resistant and high-temperature resistant
2) We also produce flange with special specifications according to customers’ requirements;
If any inquiry about products, please feel free to contact us sales@yaang.com
PT - PENETRATION TESTING
This method is used for detection of welding discontinuities (material discontinuities) appearing on the surface of a welded connector. This test is done following a visual testing of a welded connector and used mainly for both ferromagnetic and non-ferromagnetic materials.
![]() |
![]() |
Tel No:+86-18267732328 / Fax No :86-0577-56809281 / Email:sales@yaang.com
Address:Longwan District, Wenzhou, Zhejiang Province, China.
Copyright Notice © Yaang.com Yaang Pipe Industry Co., Limited All rights reserved.