ASME B16.9 ASTM A403 304L Reducing Cross 2-1/2 Inch×2 Inch Sch40

Quick Details

Material: 304L
Technics: Forged
Type: Reducing Cross
Place of Origin: Zhejiang, China (Mainland)
Brand Name: Yaang
WT: Sch40
Size: 2-1/2" ×2" (DN65×DN50)

Packaging & Delivery

Packaging Details:
Plywood case or fumigated woodern case or as per customers' requests.

Delivery Detail: 2 - 10 days after receiving the deposit

Packaging Details:	Plywood case or fumigated woodern case or as per customers' requests.
Delivery Detail:	2 - 10 days after receiving the deposit

Specifications

ASME B16.9 ASTM A403 304L Reducing Cross

Type: Reducing Cross

Material: 304L

WT: Sch40

Size: 2-1/2" ×2" (DN65×DN50)

A pipe cross is a kind of pipe fitting. It is used in the place where four pipes meet together. The pipe cross may have one inlet and three outlets, or there inlets and one outlet. The diameter of the outlet and inlet can be the same and can also be different. That is to say, straight cross and reducing cross are both availabe.

China Pipe Cross Manufacturer yaang supplies ASME B16.9 ASTM A403 304L Reducing Cross, 2-1/2 Inch×2 Inch, Sch40.

Composition ranges for 304 grade stainless steel

Grade

304

min.

max.

0.08

2.0

0.75

0.045

0.030

18.0

20.0

8.0

10.5

0.10

304L

min.

max.

0.030

2.0

0.75

0.045

0.030

18.0

20.0

8.0

12.0

0.10

304H

min.

max.

0.04

0.10

2.0

0.75

-0.045

0.030

18.0

20.0

8.0

10.5

Mechanical properties of 304 grade stainless steel

Grade	Tensile Strength (MPa) min	Yield Strength 0.2% Proof (MPa) min	Elongation (% in 50mm) min	Hardness
Grade	Tensile Strength (MPa) min	Yield Strength 0.2% Proof (MPa) min	Elongation (% in 50mm) min	Rockwell B (HR B) max	Brinell (HB) max
304	515	205	40	92	201
304L	485	170	40	92	201
304H	515	205	40	92	201
304H also has a requirement for a grain size of ASTM No 7 or coarser.

Physical properties of 304 grade stainless steel in the annealed condition

Grade	Density (kg/m3)	Elastic Modulus (GPa)	Mean Coefficient of Thermal Expansion (μm/m/°C)			Thermal Conductivity (W/m.K)		Specific Heat 0-100°C (J/kg.K)	Electrical Resistivity (nΩ.m)
			0-100°C	0-315°C	0-538°C	at 100°C	at 500°C
304/L/H	8000	193	17.2	17.8	18.4	16.2	21.5	500	720

Grade specifications for 304 grade stainless steel

Grade	UNS No	Old British		Euronorm		Swedish SS	Japanese JIS
Grade	UNS No	BS	En	No	Name	Swedish SS	Japanese JIS
304	S30400	304S31	58E	1.4301	X5CrNi18-10	2332	SUS 304
304L	S30403	304S11	-	1.4306	X2CrNi19-11	2352	SUS 304L
304H	S30409	304S51	-	1.4948	X6CrNi18-11	-	-
These comparisons are approximate only. The list is intended as a comparison of functionally similar materials not as a schedule of contractual equivalents. If exact equivalents are needed original specifications must be consulted.

Reducing Cross

Nominal Diameter		Outside Diameter				Center to End
Nominal Diameter		D1		D2		Center to End
DN	NPS	Series A	Series B	Series A	Series B	C	M
65×65	2/1/2×2.1/2	73.0	76	73.0	76	76	76
65×50	2/1/2×2	73.0	76	60.3	57	76	70
65×40	2/1/2×1.1/2	73.0	76	48.3	45	76	67
65×32	2/1/2×1.1/4	73.0	76	42.4	38	76	64
65×25	2/1/2×1	73.0	76	33.7	32	76	57

Pipe Cross: Pipe Cross makes 90° branch from the main run of pipe.

Applications of pipe cross:
Pipe cross are widely used in various commercial and industrial applications. Industrial applications include: Chemical processing, Petroleum, Pulp/paper, Refining, Textile, Waste treatment, Marine, Utilities/power generation, Industrial equipment, Automotive, Gas compression and distribution industries.
Pipe cross are also recommended for industrial plant fluid power systems.

If any inquiry, please feel free to contact by email [email protected]