PRODUCTS
Credibility ,ASME B16.9 ASTM A815 F51 Welded Lap Joint Stub End 14 Inch Schedule STD
ASME B16.11 ASTM A182 F321 Socket Welding Cap 2 Inch 3000LBS
ASME B16.5 ASTM B564 Alloy C22 WNRTJ Flange 4 Inch SCH80S CL1500
ASME B16.11 ASTM A182 GR.F316L Threaded Hex Head Plug 1 Inch CL3000
ASME B16.5 ASTM B564 UNS N06625 WNST Flange 6 Inch SCH40S CL900
ASME B36.19 ASTM A213 TP347 Seamless Pipe Cold Finished 168.3 x 4.2 x 8000MM
ASME B16.5 ASTM B564 Incoloy 825 WNRTJ Flange 3 Inch SCH40S CL900
ASME B16.9 ASTM B366 Nickel Alloy 200/201 Concentric Reducer 4 Inch - 1-1/2 Inch SCH80
MSS-SP43 (A) ASTM A815 UNS32750 SAF2507 Stub End 3 Inch SCH80S
ASME B16.5 ASTM B564 Hastelloy C276 Blind Flange RF 80NB CL150
ASME B16.5 ASTM B564 Hastelloy C276 Socket Weld Flange 3 Inch CL150
ASME B16.9 ASTM B366 Hastelloy C276 Welded Stub End DN609.6x4MM
ASME B16.9 ASTM B366 Hastelloy C276 45 Degree Welded Elbow LR DN609.6x4MM
ASME B16.9 ASTM B366 Hastelloy C276 90 Degree Welded Elbow LR DN609.6x4MM
Packaging & Delivery
Packaging Detail: | Wooden cases or PPwrapping with bundles as customer's required |
Delivery Detail: | 2 - 10 days |
Specifications
ASME B16.9 ASTM A403 WP304L Eccentric Reducer DN150 - DN100 SCH10S
1. Material: 304L
2. Technics: Cold Forming
3. Type: WP304L Eccentric Reducer
4. Size: 6" - 4" (DN150 - DN100)
WT: Sch10S
China Reducer Manufacturer Yaang supplies ASME B16.9 ASTM A403 WP304L Eccentric Reducer, DN150 - DN100, SCH10S.
NPS | O.D. D |
O.D. D1 |
Len H |
6*4 | 168.3 | 114.3 | 140 |
Composition ranges for 304L grade stainless steel
Grade |
C |
Mn |
Si |
P |
S |
Cr |
Mo |
Ni |
N |
|
304 |
min. max. |
- 0.08 |
- 2.0 |
- 0.75 |
- 0.045 |
- 0.030 |
18.0 20.0 |
- |
8.0 10.5 |
- 0.10 |
304L |
min. max. |
- 0.030 |
- 2.0 |
- 0.75 |
- 0.045 |
- 0.030 |
18.0 20.0 |
- |
8.0 12.0 |
- 0.10 |
304H |
min. max. |
0.04 0.10 |
- 2.0 |
- 0.75 |
-0.045 |
- 0.030 |
18.0 20.0 |
- |
8.0 10.5 |
- |
Grade |
Tensile Strength (MPa) min |
Yield Strength 0.2% Proof (MPa) min |
Elongation (% in 50mm) min |
Hardness |
|
Rockwell B (HR B) max |
Brinell (HB) max |
||||
304 |
515 |
205 |
40 |
92 |
201 |
304L |
485 |
170 |
40 |
92 |
201 |
304H |
515 |
205 |
40 |
92 |
201 |
304H also has a requirement for a grain size of ASTM No 7 or coarser. |
Grade |
Density (kg/m3) |
Elastic Modulus (GPa) |
Mean Coefficient of Thermal Expansion (μm/m/°C) |
Thermal Conductivity (W/m.K) |
Specific Heat 0-100°C (J/kg.K) |
Electrical Resistivity (nΩ.m) |
|||
0-100°C |
0-315°C |
0-538°C |
at 100°C |
at 500°C |
|||||
304/L/H |
8000 |
193 |
17.2 |
17.8 |
18.4 |
16.2 |
21.5 |
500 |
720 |
Grade |
UNS No |
Old British |
Euronorm |
Swedish SS |
Japanese JIS |
||
BS |
En |
No |
Name |
||||
304 |
S30400 |
304S31 |
58E |
1.4301 |
X5CrNi18-10 |
2332 |
SUS 304 |
304L |
S30403 |
304S11 |
- |
1.4306 |
X2CrNi19-11 |
2352 |
SUS 304L |
304H |
S30409 |
304S51 |
- |
1.4948 |
X6CrNi18-11 |
- |
- |
These comparisons are approximate only. The list is intended as a comparison of functionally similar materials not as a schedule of contractual equivalents. If exact equivalents are needed original specifications must be consulted. |
Type |
304L Eccentric Reducer |
Size |
Seamless: 1/2" - 24"; welded: 8" - 100" |
Wall thickness |
SCH 5,SCH 10,SCH 20,SCH 40,SCH 80,SCH 120,SCH 160,SCH XXS |
Standards |
ANSI, ASTM,DIN, ASME, etc |
Material |
Carbon Steel: ASTM: SA105N/A105, ASTM SA350 LF2,etc Stainless Steel: ASTM A182 F304/304L/316/316L, etc Alloy Steel: ASTM A182 F1/F5/F9/F11/F22/F91, Etc. Duplex stainless steel: ASTM A182 F51/F53/F55/F60, etc Super Duplex Stainless Steel: S32750/2507, UNS32760, etc Nicke alloys: Nickel 200, Monel 400, Inconel 600/625, Incoloy 825/800, Hastelloy C276, Hastelloy C276, Hastelloy B1/B2/B3, Alloy 20, etc Cu-Ni: 90/10,70/30, etc |
Surface treatment |
Transparent oil, rust-proof black oil or hot galvanized |
Applications |
Petroleum, chemical, power, gas, metallurgy, shipbuilding, construction, etc |
An eccentric reducer is manufactured with the smaller outlet off center to the larger end, which allows it to align with only one side of the inlet. The eccentric reducer must be installed with straight side up so that it can prevent trapping air at the pump suction. The eccentric reducers allow simple connection of different sized pipes.
Applications of 304L Eccentric Reducer:
1) Packing Method:
Normal packing: plastic film or bubble paper wrapped on product's surface ,protect ends with caps , pack with wooden case or load on fumifation plywood pallet .
Custom made as customers request.
2) Shipping Way:
Usually by Sea, By Air, By Train or River-and-Sea Coordinated Transport.
As per customer's request.
Where can we find the high quality ASME B16.9 ASTM A403 WP304L Eccentric Reducer, DN150 - DN100, SCH10S.
You can visit this website: www.yaang.com (Yaang Pipe Industry Co., Limited).
If any inquiry about products, please feel free to contact us [email protected]
![]() |
![]() |
Tel No:+86-18267732328 / Email:[email protected]
Address:Longwan District, Wenzhou, Zhejiang Province, China.
Copyright Notice © www.yaang.com Yaang Pipe Industry Co., Limited All rights reserved.
Yaang Pipe Industry Co., Ltd. is an international supplier of piping solutions for flange, butt welding fittings, socket welding fittings and threaded fittings. Our products are widely used in different industrial fields, including oil and gas, chemical industry, petrochemical industry, power plant, pulp and paper industry, environmental and water conservancy engineering, engineering projects, etc.