- Material: UNS NO6601 / Alloy 601 / Inconel 601
- Technics: Cold forming
- Type: Stub End
- Place of Origin: Zhejiang, China (Mainland)
- Brand Name: Yaang
- Connection: Welding
- Head Code: Round
- Size: 4" (DN100)
|Packaging Details:||fumigation free plywood cases or as per customers' requests|
|Delivery Detail:||Delivery after receiving deposit|
ASTM B366 Alloy 601 Butt Welded Stub End 4 Inch SCH40S
Size: 4" (DN100)
Material: UNS NO6601 / Alloy 601 / Inconel 601
China STUB END Manufacturer Yaang offers MSS SP-43 type A ASTM B366 Alloy 601 Butt Welded Stub End, 4 Inch, SCH10S.
Inconel 601 is a nickel-chromium alloy used for applications that require resistance to corrosion and heat. This nickel alloy stands out due to its resistance to high temperature oxidation, remaining highly resistant to oxidation through 2200° F. Alloy 601 develops a tightly adherent oxide scale which resists spalling even under conditions of severe thermal cycling. This nickel alloy has good high temperature strength, and retains its ductility after long service exposure. It has good resistance to aqueous corrosion, high mechanical strength, and is readily formed, machined and welded. Inconel 601’s properties make it a material of broad utility in fields like thermal processing, chemical processing, pollution control, aerospace, and power generation. However, alloy 601 is not suggested for use in strongly reducing, sulfur bearing environments.
|Tensile (psi)||.2% Yield (psi)||Elongation (%)|
|Alloy 601 Stub End|
Dimensions are in millimeters unless otherwise indicated. Weights are in kilograms and approximately given.
Alloy 601 Stub End
What are they?Alloy 601 Stub Ends are fittings used in place of welded flanges where rotating back up flanges are desired.
They are also called Lap Joints and Vanstone Flared Laps.
How do they work?
A rotating back up flange seats itself against the back surface of the Stub End. When bolts are added, the clamping action of the bolts presses the rotating back up flange against the back of the Stub End. The gasket surface of the Stub End then presses against a gasket and another gasket surface providing joints like standard flange joints. The seal is made by the gasket surface of the stub end alone, the flange only provides the clamping pressure on the joint.
Since Stub Ends are made from material compatible with the designed piping system, back up flanges do not have to be made from the same material. The flange can be made from less expensive material because it never comes in contact with the process fluid.Alloy 601 Stub Ends' Types
Type "A" - Type "B" - Type "C" - Type "CS"
Where can we find the high quality MSS SP-43 type A ASTM B366 Alloy 601 Butt Welded Stub End 4 Inch SCH10S.
You can visit this website: www.yaang.com (Yaang Pipe Industry Co., Limited).
If any inquiry, please feel free to contact by email email@example.com