- Ti-6Al-6V-2Sn-0.75Cu Ti Alloy Valve
- Ti-6Al-6V-2Sn-0.75Cu Ti Alloy Flange
- Ti-6Al-6V-2Sn-0.75Cu Ti Alloy pipe fitting
- Ti-6Al-6V-2Sn-0.75Cu Ti Alloy angle bar
- Ti-6Al-6V-2Sn-0.75Cu Ti Alloy pipe
Ti-6Al-6V-2Sn-0.75Cu Ti Alloy
Production specification
Data center describes many of the common steel models, we can not determine the company's warehouse has all types of steel products inventory or raw materials.
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.
Ti-6Al-6V-2Sn-0.75Cu Ti Alloy
Our advantages
Ti-6Al-6V-2Sn-0.75Cu properties and heat treatment forged piece, Including Ti-6Al-6V-2Sn-0.75Cu application and specifications, Including Ti-6Al-6V-2Sn-0.75Cu tube plate, Ti-6Al-6V-2Sn-0.75Cu Pipe Fitting, Ti-6Al-6V-2Sn-0.75Cu flange, Ti-6Al-6V-2Sn-0.75Cu Angle Bar,Ti-6Al-6V-2Sn-0.75Cu Valve,Ti-6Al-6V-2Sn-0.75Cu 3d bend.
--------------------------------------------------------------------------------
Introduction to Our Products:
Specialized high quality steel
We have the advantages of equipment, technologies and price
--------------------------------------------------------------------------------
Ti-6Al-6V-2Sn-0.75Cu has the following specifications:
Valve:
Diameter : 1mm-1300mm
Steel pipe:
Size:
OD: 9.5mm - 813mm
WT: 0.8mm - 34mm
Length: 1 - 13m, also can be customed.
Items |
seamless pipe & tube, pipe & tube |
|||
Standard |
ASTM, GB, DIN, AISI, etc |
|||
Outer Diameter |
Round pipe9.5mm--813mm |
|||
square |
12.7x12.7--200X200mm |
|||
rectangular |
20X40--150X200mm |
|||
Thickness |
0.8mm - 34mm |
|||
Length |
5.8m,6m, or as customers' request |
|||
Tolerance |
a) Outer Diameter: +/- 0.2mm |
|||
b) Thickness: +/- 0.02mm |
||||
c) Length: +/- 5mm |
||||
Surface |
180Grit, 320Grit, 400Grit Satin / Hairline |
|||
400Grit, 500Grit, 600Grit Mirror finish |
||||
Application |
Widely used in petroleum, Foodstuff, chemical industry, construction, electric power, nuclear energy, biotechnology, machinery, papermaking, shipbuilding, boiler fields, etc |
Pipe fitting:
Size: 1/8 inch - 80 inch (DN6 - DN2000) WT: Sch5s - Sch160XXS
Items |
Elbow,Equal Tee,Reducer Tee,Concentric Reducer,Eccentric Reducer,Cap,etc |
|
Standard |
ASME |
ANSI B16.9,ANSI B16.28,MSS-SP-75 |
DIN |
DIN2605,DIN2615, DIN2616, DIN2617, DIN28011 |
|
SGP |
JISB2313 |
|
EN |
EN10253-1 EN10253-2 |
|
Material |
ASME |
A234 WPB,A234 WP1,A234 WP5,A234,WP9, A234 WPB11,A234 WPB12,A234 WPB22,WP91, A420,WPHY42,WPHY52,WPHY60,WPHY65, WPHY70,WP304,WP304L,WP304H,WP316, WP316L,WP321,WP347,WP347H |
DIN |
ST37.0,ST35.8,ST45.8,S235JR,P235GH,P265GH, 10CrMo910,15CrMo,12Cr1MoV |
|
JIS |
JIS G3454,STPG370,TPG410 |
|
Surface |
Black paint/bright paint/Galvanized |
|
Marking |
As customer’s requirements |
Flange:
Product Name | Flange | |
Items | Plate, Welding Neck, Slip on, Blind, Lap joint, Threaded Flange | |
Standard | ANSI | ANSI B16.5 ASME B16.47 series A/B |
DIN | DIN | |
GOST | GOST 12820-80 | |
EN | EN1092-1:2002 | |
JIS | JIS B2220-2004, KS D3576, KS B6216 KS B1511-2007 JIS B2261; JIS B8210 | |
BS | BS4504 BS10 Table D/E | |
Material | ANSI | CS A105/SA 105NSS 304/304L, 316/316L Alloy Steel: WHPY45/52/65/80 |
DIN | CS RST37.2;S235JR SS 304/304L,316/316L | |
GOST | CS CT20;16MN;SS 304/304L,316/316L | |
EN | CS RST37.2;S235JR;C22.8SS 304/304L,316/316L | |
JIS | SS400,SF440 SS 304/304L, 316/316L | |
BS | CSRST37.2;S235JR;C22.8;Q235SS 304/304L,316/316L | |
Pressure | ANSI | Class 150, 300, 600, 900, 1500 2500lbs |
DIN | PN6,PN10,PN16,PN25,PN40,PN64,PN100 | |
GOST | PN6,PN10,PN16,PN25 | |
EN | PN6,PN10,PN16,PN25,PN40,PN64,PN100 | |
JIS | 1K,2K,5K,10K,16K,20K,30K,40K | |
BS | PN6,PN10,PN16,PN25,PN40,PN64,PN100 | |
Size | ANSI | 1/2” – 60” |
DIN | DN15-DN2000 | |
GOST | DN15-DN1600 | |
EN | DN15-DN2000 | |
JIS | 15A-1500A | |
BS | DN15-DN2000 | |
Coating | varnish, yellow paint, anti-rust oil, galvanizing etc | |
Usage | Used for the connection of all kinds of pipeline. | |
to convey the water, steam, air, gas and oil |
Length: Any length based on the customer's requirement.
--------------------------------------------------------------------------------
Chemical composition % of the ladle analysis of grade Ti-6Al-6V-2Sn-0.75Cu and Standards
Category Titanium Alloy
Class Wrought
Type Alpha-beta alloy
Designations United States: MIL-T-9046, AMS 4971, AMS 4918, MIL-T-9047, AMS 4978, AMS 4979
Composition
Element Weight %
Al 6
V 6
Sn 2
Cu 0.75
Mechanical Properties
Properties Conditions
T (°C) Treatment
Density (×1000 kg/m3) 4.54 25
Related hot word search: Valve Ti-6Al-6V-2Sn-0.75Cu Ti Alloy,forging Ti-6Al-6V-2Sn-0.75Cu Ti Alloy,Ti-6Al-6V-2Sn-0.75Cu Ti Alloy tube sheet,elbow Ti-6Al-6V-2Sn-0.75Cu Ti Alloy,Ti-6Al-6V-2Sn-0.75Cu Ti Alloy flat bar,pipe Ti-6Al-6V-2Sn-0.75Cu Ti Alloy,Ti-6Al-6V-2Sn-0.75Cu Ti Alloy Tee
Prev:Ti-7AI-4Mo Ti Alloy
Next:Ti-6Al-4V-ELI (low O2) Ti Alloy