- Ti-8Mo-8V-2Fe-3Al Ti Alloy Valve
- Ti-8Mo-8V-2Fe-3Al Ti Alloy Flange
- Ti-8Mo-8V-2Fe-3Al Ti Alloy pipe fitting
- Ti-8Mo-8V-2Fe-3Al Ti Alloy angle bar
- Ti-8Mo-8V-2Fe-3Al Ti Alloy pipe
Ti-8Mo-8V-2Fe-3Al Ti Alloy
Production specification
Data center describes many of the common steel models, we can not determine the company's warehouse has all types of steel products inventory or raw materials.
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.
Ti-8Mo-8V-2Fe-3Al Ti Alloy
Ti-8Mo-8V-2Fe-3Al properties and heat treatment forged piece, Including Ti-8Mo-8V-2Fe-3Al application and specifications, Including Ti-8Mo-8V-2Fe-3Al tube plate, Ti-8Mo-8V-2Fe-3Al Pipe Fitting, Ti-8Mo-8V-2Fe-3Al flange, Ti-8Mo-8V-2Fe-3Al Angle Bar,Ti-8Mo-8V-2Fe-3Al Valve,Ti-8Mo-8V-2Fe-3Al 3d bend.
Ti-8Mo-8V-2Fe-3Al has the following specifications:
Valve:
Diameter : 1mm-1300mm
Steel pipe:
Size:
OD: 9.5mm - 813mm
WT: 0.8mm - 34mm
Length: 1 - 13m, also can be customed.
Items |
seamless pipe & tube, pipe & tube |
|||
Standard |
ASTM, GB, DIN, AISI, etc |
|||
Outer Diameter |
Round pipe9.5mm--813mm |
|||
square |
12.7x12.7--200X200mm |
|||
rectangular |
20X40--150X200mm |
|||
Thickness |
0.8mm - 34mm |
|||
Length |
5.8m,6m, or as customers' request |
|||
Tolerance |
a) Outer Diameter: +/- 0.2mm |
|||
b) Thickness: +/- 0.02mm |
||||
c) Length: +/- 5mm |
||||
Surface |
180Grit, 320Grit, 400Grit Satin / Hairline |
|||
400Grit, 500Grit, 600Grit Mirror finish |
||||
Application |
Widely used in petroleum, Foodstuff, chemical industry, construction, electric power, nuclear energy, biotechnology, machinery, papermaking, shipbuilding, boiler fields, etc |
Pipe fitting:
Size: 1/8 inch - 80 inch (DN6 - DN2000) WT: Sch5s - Sch160XXS
Items |
Elbow,Equal Tee,Reducer Tee,Concentric Reducer,Eccentric Reducer,Cap,etc |
|
Standard |
ASME |
ANSI B16.9,ANSI B16.28,MSS-SP-75 |
DIN |
DIN2605,DIN2615, DIN2616, DIN2617, DIN28011 |
|
SGP |
JISB2313 |
|
EN |
EN10253-1 EN10253-2 |
|
Material |
ASME |
A234 WPB,A234 WP1,A234 WP5,A234,WP9, A234 WPB11,A234 WPB12,A234 WPB22,WP91, A420,WPHY42,WPHY52,WPHY60,WPHY65, WPHY70,WP304,WP304L,WP304H,WP316, WP316L,WP321,WP347,WP347H |
DIN |
ST37.0,ST35.8,ST45.8,S235JR,P235GH,P265GH, 10CrMo910,15CrMo,12Cr1MoV |
|
JIS |
JIS G3454,STPG370,TPG410 |
|
Surface |
Black paint/bright paint/Galvanized |
|
Marking |
As customer’s requirements |
Flange:
Product Name | Flange | |
Items | Plate, Welding Neck, Slip on, Blind, Lap joint, Threaded Flange | |
Standard | ANSI | ANSI B16.5 ASME B16.47 series A/B |
DIN | DIN | |
GOST | GOST 12820-80 | |
EN | EN1092-1:2002 | |
JIS | JIS B2220-2004, KS D3576, KS B6216 KS B1511-2007 JIS B2261; JIS B8210 | |
BS | BS4504 BS10 Table D/E | |
Material | ANSI | CS A105/SA 105NSS 304/304L, 316/316L Alloy Steel: WHPY45/52/65/80 |
DIN | CS RST37.2;S235JR SS 304/304L,316/316L | |
GOST | CS CT20;16MN;SS 304/304L,316/316L | |
EN | CS RST37.2;S235JR;C22.8SS 304/304L,316/316L | |
JIS | SS400,SF440 SS 304/304L, 316/316L | |
BS | CSRST37.2;S235JR;C22.8;Q235SS 304/304L,316/316L | |
Pressure | ANSI | Class 150, 300, 600, 900, 1500 2500lbs |
DIN | PN6,PN10,PN16,PN25,PN40,PN64,PN100 | |
GOST | PN6,PN10,PN16,PN25 | |
EN | PN6,PN10,PN16,PN25,PN40,PN64,PN100 | |
JIS | 1K,2K,5K,10K,16K,20K,30K,40K | |
BS | PN6,PN10,PN16,PN25,PN40,PN64,PN100 | |
Size | ANSI | 1/2” – 60” |
DIN | DN15-DN2000 | |
GOST | DN15-DN1600 | |
EN | DN15-DN2000 | |
JIS | 15A-1500A | |
BS | DN15-DN2000 | |
Coating | varnish, yellow paint, anti-rust oil, galvanizing etc | |
Usage | Used for the connection of all kinds of pipeline. | |
to convey the water, steam, air, gas and oil |
Lenth: Any lenth based on the customer's requirement.
--------------------------------------------------------------------------------
Chemical composition % of the ladle analysis of grade Ti-8Mo-8V-2Fe-3Al and Standards
Category Titanium Alloy
Class Wrought
Type Beta alloy
Composition
Element Weight %
Mo 8
V 8
Fe 2
Al 3
Mechanical Properties
Properties Conditions
T (°C) Treatment
Density (×1000 kg/m3) 4.84 25
Poisson's Ratio 0.33 25
Elastic Modulus (GPa) 106.9 25
Tensile Strength (Mpa) 1310 25 soludon+age
Yield Strength (Mpa) 1241
Elongation (%) 8
Reduction in Area (%)
Hardness (HRC) 40 25 soludon+age
--------------------------------------------------------------------------------
Machining performance
Ti-8Mo-8V-2Fe-3Al the mechanical properties of the report, the report provides detailed performance analysis and application.
--------------------------------------------------------------------------------
Principal Design Features
One of the most widely used precipitation hardening grades in the business. While soft and ductile in the solution annealed condition, it is capable of high properties with a single precipitation or aging treatment. Characterized by good corrosion resistance, high harness, toughness and strength.
--------------------------------------------------------------------------------
Machinability
Long, gummy chips characterize this alloys machinability. It can be machined in the annealed condition, however condition H1150M will yield best results. Post machining solution treatment of parts will be required prior to final hardening if machining in this condition.
--------------------------------------------------------------------------------
Heat Treatment
CONDITION A--Soak at 1900 F (1038 C) for 30 minutes and cool below 60 F (16 C) for complete martensite transformation. CONDITION H 950- Treat Condition A material at 900 F(482 C) for 1 hour, air cool.. CONDITION H925, H1025, H1075, H1100, H1150- Soak solution treated material for 4 hours at specified temperature, air cool, CONDITION H1150M- Soak solution treated material at 1400 F (760 C) for 2 hours, air cool, then re-heat to 1150 F (620 C) for 4 hours and air cool.
--------------------------------------------------------------------------------
Welding
Successfully welded by common fusion and resistance methods, this alloy should not be joined by oxyacetylene welding. AWS E/ER630 filler metal is recommended if required.
--------------------------------------------------------------------------------
Forging
Soak for 1 hour at 2150 F (1177 C) prior to forging. Do not work below 1850 F (1010 C). Post-work solution treatment is required prior to final hardening.
--------------------------------------------------------------------------------
Hot tags:Ti-8Mo-8V-2Fe-3Al tube plate, Ti-8Mo-8V-2Fe-3Al Pipe Fitting, Ti-8Mo-8V-2Fe-3Al flange, Ti-8Mo-8V-2Fe-3Al Angle Bar,Ti-8Mo-8V-2Fe-3Al Valve,Ti-8Mo-8V-2Fe-3Al forgings
stainless steel | mould steel | Heat resistant steel | Tool steel | Bearing steel | Spring steel | Alloy steel | Nickel base alloy and high nickel containing steels | Cementation steels | Free-cutting steels | Cold extrusion steels | Nitriding steels | Chain steels | Carbon steel | Ti Alloy | High temperature high strength alloy and high-temperature alloy | Low alloy high-temperature steel |
Related hot word search:Ti-8Mo-8V-2Fe-3Al Ti Valve Ti-8Mo-8V-2Fe-3Al Ti Alloy,forging Ti-8Mo-8V-2Fe-3Al Ti Alloy,Ti-8Mo-8V-2Fe-3Al Ti Alloy tube sheet,elbow Ti-8Mo-8V-2Fe-3Al Ti Alloy,Ti-8Mo-8V-2Fe-3Al Ti Alloy flat bar,pipe Ti-8Mo-8V-2Fe-3Al Ti Alloy,Ti-8Mo-8V-2Fe-3Al Ti Alloy Tee
Prev:DIN 1.0909 Ti Alloy
Next:Ti-8Mn Ti Alloy