- Ti12Mo5Zr5Sn Ti Alloy Valve
- Ti12Mo5Zr5Sn Ti Alloy Flange
- Ti12Mo5Zr5Sn Ti Alloy pipe fitting
- Ti12Mo5Zr5Sn Ti Alloy angle bar
- Ti12Mo5Zr5Sn Ti Alloy pipe
Ti12Mo5Zr5Sn Ti Alloy
Ti12Mo5Zr5Sn Ti Alloy angle bars, Ti12Mo5Zr5Sn Ti Alloy flanges, Pipe Fitting, Steel Pipe, Heat Exchanger and Reducer, Gasket, Tee, Pipe Fitting, Tube Plate, have all specifications. With many yeas production experience, strict control Ti12Mo5Zr5Sn Ti Alloy chemical composition and Ti12Mo5Zr5Sn Ti Alloy mechanical properties.
Production specification
Data center describes many of the common steel models, we can not determine the company's warehouse has all types of steel products inventory or raw materials.
Angle bar: 1mm to 1300mm
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.
Products are the main used in industrial manufacturing various types Ti AlloyTi30Nb plate,Ti30Nb Valve,Ti30Nb forgings,Ti30Nb suppliers, Ti30Nb Stock,Ti30Nb Pipe Fitting, Ti30Nb Angle Bar, Ti30Nb pipe,Ti30Nb tube,Ti30Nb mould,Ti30Nb round ingot,Ti30Nb cold-rolled steel,Ti30Nb Reducer,Ti30Nb strap steel,Ti30Nb hot-rolled steel,Ti30Nb medium plate, Ti30Nb heavy plate,Ti30Nb shapped bar,Ti30Nb hexahedral bar,Ti30Nb,Ti30Nb slab ingot,Ti30Nb slab,Ti30Nb price,Ti30Nb angle bar,Ti30Nb square steel,Ti30Nb wire.Extending the industrial all kinds of mechanical industrial parts machining and, at the same time, using fine heat treatment process,tempering,hardening,heating,bright annealing,rotary hearth.chemical composition and Improving mechanical properties of Ti30Nb.
Ti30Nb Ti Alloy
Our advantages
Ti30Nb properties and heat treatment forged piece, Including Ti30Nb application and specifications, Including Ti30Nb tube plate, Ti30Nb Pipe Fitting, Ti30Nb flange, Ti30Nb Angle Bar,Ti30Nb Valve,Ti30Nb 3d bend.
--------------------------------------------------------------------------------
Introduction to Our Products:
Specialized high quality steel
We have the advantages of equipment, technologies and price
--------------------------------------------------------------------------------
Ti30Nb has the following specifications:
Valve:
Diameter : 1mm-1300mm
Steel pipe:
Size:
OD: 9.5mm - 813mm
WT: 0.8mm - 34mm
Length: 1 - 13m, also can be customed.
Items |
seamless pipe & tube, pipe & tube |
|||
Standard |
ASTM, GB, DIN, AISI, etc |
|||
Outer Diameter |
Round pipe9.5mm--813mm |
|||
square |
12.7x12.7--200X200mm |
|||
rectangular |
20X40--150X200mm |
|||
Thickness |
0.8mm - 34mm |
|||
Length |
5.8m,6m, or as customers' request |
|||
Tolerance |
a) Outer Diameter: +/- 0.2mm |
|||
b) Thickness: +/- 0.02mm |
||||
c) Length: +/- 5mm |
||||
Surface |
180Grit, 320Grit, 400Grit Satin / Hairline |
|||
400Grit, 500Grit, 600Grit Mirror finish |
||||
Application |
Widely used in petroleum, Foodstuff, chemical industry, construction, electric power, nuclear energy, biotechnology, machinery, papermaking, shipbuilding, boiler fields, etc |
|||
Pipe fitting:
Size: 1/8 inch - 80 inch (DN6 - DN2000) WT: Sch5s - Sch160XXS
Items |
Elbow,Equal Tee,Reducer Tee,Concentric Reducer,Eccentric Reducer,Cap,etc |
|
Standard |
ASME |
ANSI B16.9,ANSI B16.28,MSS-SP-75 |
DIN |
DIN2605,DIN2615, DIN2616, DIN2617, DIN28011 |
|
SGP |
JISB2313 |
|
EN |
EN10253-1 EN10253-2 |
|
Material |
ASME |
A234 WPB,A234 WP1,A234 WP5,A234,WP9, A234 WPB11,A234 WPB12,A234 WPB22,WP91, A420,WPHY42,WPHY52,WPHY60,WPHY65, WPHY70,WP304,WP304L,WP304H,WP316, WP316L,WP321,WP347,WP347H |
DIN |
ST37.0,ST35.8,ST45.8,S235JR,P235GH,P265GH, 10CrMo910,15CrMo,12Cr1MoV |
|
JIS |
JIS G3454,STPG370,TPG410 |
|
Surface |
Black paint/bright paint/Galvanized |
|
Marking |
As customer’s requirements |
|
Flange:
| Product Name | Flange | |
| Items | Plate, Welding Neck, Slip on, Blind, Lap joint, Threaded Flange | |
| Standard | ANSI | ANSI B16.5 ASME B16.47 series A/B |
| DIN | DIN | |
| GOST | GOST 12820-80 | |
| EN | EN1092-1:2002 | |
| JIS | JIS B2220-2004, KS D3576, KS B6216 KS B1511-2007 JIS B2261; JIS B8210 | |
| BS | BS4504 BS10 Table D/E | |
| Material | ANSI | CS A105/SA 105NSS 304/304L, 316/316L Alloy Steel: WHPY45/52/65/80 |
| DIN | CS RST37.2;S235JR SS 304/304L,316/316L | |
| GOST | CS CT20;16MN;SS 304/304L,316/316L | |
| EN | CS RST37.2;S235JR;C22.8SS 304/304L,316/316L | |
| JIS | SS400,SF440 SS 304/304L, 316/316L | |
| BS | CSRST37.2;S235JR;C22.8;Q235SS 304/304L,316/316L | |
| Pressure | ANSI | Class 150, 300, 600, 900, 1500 2500lbs |
| DIN | PN6,PN10,PN16,PN25,PN40,PN64,PN100 | |
| GOST | PN6,PN10,PN16,PN25 | |
| EN | PN6,PN10,PN16,PN25,PN40,PN64,PN100 | |
| JIS | 1K,2K,5K,10K,16K,20K,30K,40K | |
| BS | PN6,PN10,PN16,PN25,PN40,PN64,PN100 | |
| Size | ANSI | 1/2” – 60” |
| DIN | DN15-DN2000 | |
| GOST | DN15-DN1600 | |
| EN | DN15-DN2000 | |
| JIS | 15A-1500A | |
| BS | DN15-DN2000 | |
| Coating | varnish, yellow paint, anti-rust oil, galvanizing etc | |
| Usage | Used for the connection of all kinds of pipeline. | |
| to convey the water, steam, air, gas and oil | ||
Length: Any length based on the customer's requirement.
--------------------------------------------------------------------------------
Chemical composition % of the ladle analysis of grade Ti30Nb and Standards
Ti30Nb ß titanium alloy
Categories: Metal; Nonferrous Metal; Titanium Alloy; Beta Titanium Alloy
Key Words: medical, surgical
Mechanical Properties Metric English Comments
Tensile Strength, Ultimate 700 MPa 102000 psi as rolled
Tensile Strength, Yield 500 MPa 72500 psi as rolled
Elongation at Break 20.0 % 20.0 % as rolled
Reduction of Area 60.0 % 60.0 % as rolled
Modulus of Elasticity 70.0 GPa 10200 ksi As rolled
Component Elements Properties Metric English Comments
Niobium, Nb (Columbium, Cb) 30.0 % 30.0 %
Titanium, Ti 70.0 % 70.0 %
Users viewing this material also viewed the following:
Ti30Ta ß titanium alloy
Ti15Mo5Zr3Al ß titanium alloy
Overview of materials for Beta Titanium Alloy
Titanium, Ti
Ti12Mo5Zr5Sn ß titanium alloy
MMEDIC28 / 12404
--------------------------------------------------------------------------------
Machining performance
Ti30Nb the mechanical properties of the report, the report provides detailed performance analysis and application.
--------------------------------------------------------------------------------
Principal Design Features
One of the most widely used precipitation hardening grades in the business. While soft and ductile in the solution annealed condition, it is capable of high properties with a single precipitation or aging treatment. Characterized by good corrosion resistance, high harness, toughness and strength.
--------------------------------------------------------------------------------
Machinability
Long, gummy chips characterize this alloys machinability. It can be machined in the annealed condition, however condition H1150M will yield best results. Post machining solution treatment of parts will be required prior to final hardening if machining in this condition.
--------------------------------------------------------------------------------
Heat Treatment
CONDITION A--Soak at 1900 F (1038 C) for 30 minutes and cool below 60 F (16 C) for complete martensite transformation. CONDITION H 950- Treat Condition A material at 900 F(482 C) for 1 hour, air cool.. CONDITION H925, H1025, H1075, H1100, H1150- Soak solution treated material for 4 hours at specified temperature, air cool, CONDITION H1150M- Soak solution treated material at 1400 F (760 C) for 2 hours, air cool, then re-heat to 1150 F (620 C) for 4 hours and air cool.
--------------------------------------------------------------------------------
Welding
Successfully welded by common fusion and resistance methods, this alloy should not be joined by oxyacetylene welding. AWS E/ER630 filler metal is recommended if required.
--------------------------------------------------------------------------------
Forging
Soak for 1 hour at 2150 F (1177 C) prior to forging. Do not work below 1850 F (1010 C). Post-work solution treatment is required prior to final hardening.
--------------------------------------------------------------------------------
Hot tags:Ti30Nb tube plate, Ti30Nb Pipe Fitting, Ti30Nb flange, Ti30Nb Angle Bar,Ti30Nb Valve,Ti30Nb forgings
stainless steel | mould steel | Heat resistant steel | Tool steel | Bearing steel | Spring steel | Alloy steel | Nickel base alloy and high nickel containing steels | Cementation steels | Free-cutting steels | Cold extrusion steels | Nitriding steels | Chain steels | Carbon steel | Ti Alloy | High temperature high strength alloy and high-temperature alloy | Low alloy high-temperature steel |
关闭提示 关闭
确 认 取 消
Products are the main used in industrial manufacturing various types Ti AlloyTi12Mo5Zr5Sn plate,Ti12Mo5Zr5Sn Valve,Ti12Mo5Zr5Sn forgings,Ti12Mo5Zr5Sn suppliers, Ti12Mo5Zr5Sn Stock,Ti12Mo5Zr5Sn Pipe Fitting, Ti12Mo5Zr5Sn Angle Bar, Ti12Mo5Zr5Sn pipe,Ti12Mo5Zr5Sn tube,Ti12Mo5Zr5Sn mould,Ti12Mo5Zr5Sn round ingot,Ti12Mo5Zr5Sn cold-rolled steel,Ti12Mo5Zr5Sn Reducer,Ti12Mo5Zr5Sn strap steel,Ti12Mo5Zr5Sn hot-rolled steel,Ti12Mo5Zr5Sn medium plate, Ti12Mo5Zr5Sn heavy plate,Ti12Mo5Zr5Sn shapped bar,Ti12Mo5Zr5Sn hexahedral bar,Ti12Mo5Zr5Sn,Ti12Mo5Zr5Sn slab ingot,Ti12Mo5Zr5Sn slab,Ti12Mo5Zr5Sn price,Ti12Mo5Zr5Sn angle bar,Ti12Mo5Zr5Sn square steel,Ti12Mo5Zr5Sn wire.Extending the industrial all kinds of mechanical industrial parts machining and, at the same time, using fine heat treatment process,tempering,hardening,heating,bright annealing,rotary hearth.chemical composition and Improving mechanical properties of Ti12Mo5Zr5Sn.
Ti12Mo5Zr5Sn Ti Alloy
Our advantages
Ti12Mo5Zr5Sn properties and heat treatment forged piece, Including Ti12Mo5Zr5Sn application and specifications, Including Ti12Mo5Zr5Sn tube plate, Ti12Mo5Zr5Sn Pipe Fitting, Ti12Mo5Zr5Sn flange, Ti12Mo5Zr5Sn Angle Bar,Ti12Mo5Zr5Sn Valve,Ti12Mo5Zr5Sn 3d bend.
--------------------------------------------------------------------------------
Introduction to Our Products:
Specialized high quality steel
We have the advantages of equipment, technologies and price
--------------------------------------------------------------------------------
Ti12Mo5Zr5Sn has the following specifications:
Valve:
Diameter : 1mm-1300mm
Steel pipe:
Size:
OD: 9.5mm - 813mm
WT: 0.8mm - 34mm
Length: 1 - 13m, also can be customed.
Items |
seamless pipe & tube, pipe & tube |
|||
Standard |
ASTM, GB, DIN, AISI, etc |
|||
Outer Diameter |
Round pipe9.5mm--813mm |
|||
square |
12.7x12.7--200X200mm |
|||
rectangular |
20X40--150X200mm |
|||
Thickness |
0.8mm - 34mm |
|||
Length |
5.8m,6m, or as customers' request |
|||
Tolerance |
a) Outer Diameter: +/- 0.2mm |
|||
b) Thickness: +/- 0.02mm |
||||
c) Length: +/- 5mm |
||||
Surface |
180Grit, 320Grit, 400Grit Satin / Hairline |
|||
400Grit, 500Grit, 600Grit Mirror finish |
||||
Application |
Widely used in petroleum, Foodstuff, chemical industry, construction, electric power, nuclear energy, biotechnology, machinery, papermaking, shipbuilding, boiler fields, etc |
|||
Pipe fitting:
Size: 1/8 inch - 80 inch (DN6 - DN2000) WT: Sch5s - Sch160XXS
Items |
Elbow,Equal Tee,Reducer Tee,Concentric Reducer,Eccentric Reducer,Cap,etc |
|
Standard |
ASME |
ANSI B16.9,ANSI B16.28,MSS-SP-75 |
DIN |
DIN2605,DIN2615, DIN2616, DIN2617, DIN28011 |
|
SGP |
JISB2313 |
|
EN |
EN10253-1 EN10253-2 |
|
Material |
ASME |
A234 WPB,A234 WP1,A234 WP5,A234,WP9, A234 WPB11,A234 WPB12,A234 WPB22,WP91, A420,WPHY42,WPHY52,WPHY60,WPHY65, WPHY70,WP304,WP304L,WP304H,WP316, WP316L,WP321,WP347,WP347H |
DIN |
ST37.0,ST35.8,ST45.8,S235JR,P235GH,P265GH, 10CrMo910,15CrMo,12Cr1MoV |
|
JIS |
JIS G3454,STPG370,TPG410 |
|
Surface |
Black paint/bright paint/Galvanized |
|
Marking |
As customer’s requirements |
|
Flange:
| Product Name | Flange | |
| Items | Plate, Welding Neck, Slip on, Blind, Lap joint, Threaded Flange | |
| Standard | ANSI | ANSI B16.5 ASME B16.47 series A/B |
| DIN | DIN | |
| GOST | GOST 12820-80 | |
| EN | EN1092-1:2002 | |
| JIS | JIS B2220-2004, KS D3576, KS B6216 KS B1511-2007 JIS B2261; JIS B8210 | |
| BS | BS4504 BS10 Table D/E | |
| Material | ANSI | CS A105/SA 105NSS 304/304L, 316/316L Alloy Steel: WHPY45/52/65/80 |
| DIN | CS RST37.2;S235JR SS 304/304L,316/316L | |
| GOST | CS CT20;16MN;SS 304/304L,316/316L | |
| EN | CS RST37.2;S235JR;C22.8SS 304/304L,316/316L | |
| JIS | SS400,SF440 SS 304/304L, 316/316L | |
| BS | CSRST37.2;S235JR;C22.8;Q235SS 304/304L,316/316L | |
| Pressure | ANSI | Class 150, 300, 600, 900, 1500 2500lbs |
| DIN | PN6,PN10,PN16,PN25,PN40,PN64,PN100 | |
| GOST | PN6,PN10,PN16,PN25 | |
| EN | PN6,PN10,PN16,PN25,PN40,PN64,PN100 | |
| JIS | 1K,2K,5K,10K,16K,20K,30K,40K | |
| BS | PN6,PN10,PN16,PN25,PN40,PN64,PN100 | |
| Size | ANSI | 1/2” – 60” |
| DIN | DN15-DN2000 | |
| GOST | DN15-DN1600 | |
| EN | DN15-DN2000 | |
| JIS | 15A-1500A | |
| BS | DN15-DN2000 | |
| Coating | varnish, yellow paint, anti-rust oil, galvanizing etc | |
| Usage | Used for the connection of all kinds of pipeline. | |
| to convey the water, steam, air, gas and oil | ||
Length: Any length based on the customer's requirement.
--------------------------------------------------------------------------------
Chemical composition % of the ladle analysis of grade Ti12Mo5Zr5Sn and Standards
Ti12Mo5Zr5Sn ß titanium alloy
Categories: Metal; Nonferrous Metal; Titanium Alloy; Beta Titanium Alloy
Key Words: medical, surgical
Mechanical Properties Metric English Comments
Tensile Strength, Ultimate 1010 MPa 146000 psi as forged and aged (600°C)
Tensile Strength, Yield 1002 MPa 145300 psi as forged and aged (600°C)
Elongation at Break 17.8 % 17.8 % as forged and aged (600°C)
Reduction of Area 56.0 % 56.0 % as forged and aged (600°C)
Component Elements Properties Metric English Comments
Molybdenum, Mo 11.5 % 11.5 %
Tin, Sn 4.50 % 4.50 %
Titanium, Ti 79.0 % 79.0 %
Zirconium, Zr 5.0 % 5.0 %
Users viewing this material also viewed the following:
Ti15Mo5Zr3Al ß titanium alloy
Ti30Nb ß titanium alloy
Ti30Ta ß titanium alloy
Ti5Al2.5Fe ISO 5832/X
Ti6Al7Nb ASTM F1295
MMEDIC27 / 12403
--------------------------------------------------------------------------------
Machining performance
Ti12Mo5Zr5Sn the mechanical properties of the report, the report provides detailed performance analysis and application.
--------------------------------------------------------------------------------
Principal Design Features
One of the most widely used precipitation hardening grades in the business. While soft and ductile in the solution annealed condition, it is capable of high properties with a single precipitation or aging treatment. Characterized by good corrosion resistance, high harness, toughness and strength.
--------------------------------------------------------------------------------
Machinability
Long, gummy chips characterize this alloys machinability. It can be machined in the annealed condition, however condition H1150M will yield best results. Post machining solution treatment of parts will be required prior to final hardening if machining in this condition.
--------------------------------------------------------------------------------
Heat Treatment
CONDITION A--Soak at 1900 F (1038 C) for 30 minutes and cool below 60 F (16 C) for complete martensite transformation. CONDITION H 950- Treat Condition A material at 900 F(482 C) for 1 hour, air cool.. CONDITION H925, H1025, H1075, H1100, H1150- Soak solution treated material for 4 hours at specified temperature, air cool, CONDITION H1150M- Soak solution treated material at 1400 F (760 C) for 2 hours, air cool, then re-heat to 1150 F (620 C) for 4 hours and air cool.
--------------------------------------------------------------------------------
Welding
Successfully welded by common fusion and resistance methods, this alloy should not be joined by oxyacetylene welding. AWS E/ER630 filler metal is recommended if required.
--------------------------------------------------------------------------------
Forging
Soak for 1 hour at 2150 F (1177 C) prior to forging. Do not work below 1850 F (1010 C). Post-work solution treatment is required prior to final hardening.
--------------------------------------------------------------------------------
Hot tags:Ti12Mo5Zr5Sn tube plate, Ti12Mo5Zr5Sn Pipe Fitting, Ti12Mo5Zr5Sn flange, Ti12Mo5Zr5Sn Angle Bar,Ti12Mo5Zr5Sn Valve,Ti12Mo5Zr5Sn forgings
stainless steel | mould steel | Heat resistant steel | Tool steel | Bearing steel | Spring steel | Alloy steel | Nickel base alloy and high nickel containing steels | Cementation steels | Free-cutting steels | Cold extrusion steels | Nitriding steels | Chain steels | Carbon steel | Ti Alloy | High temperature high strength alloy and high-temperature alloy | Low alloy high-temperature steel |
关闭提示 关闭
确 认 取 消
Related hot word search:Ti12Mo5Zr5Sn Ti Valve Ti12Mo5Zr5Sn Ti Alloy,forging Ti12Mo5Zr5Sn Ti Alloy,Ti12Mo5Zr5Sn Ti Alloy tube sheet,elbow Ti12Mo5Zr5Sn Ti Alloy,Ti12Mo5Zr5Sn Ti Alloy flat bar,pipe Ti12Mo5Zr5Sn Ti Alloy,Ti12Mo5Zr5Sn Ti Alloy Tee
Prev:Ti30Nb Ti Alloy
Next:Ti15Mo5Zr3Al Ti Alloy